USER DIRECTION OF UN-REELING
POCKET NOT DETAILED
BY SIGNING THIS DOCUMENT
YOU ARE ACCEPTING THE
CONDITIONS SET WITHIN.
YOUR REQUIREMENTS MUST BE
LISTED WITHIN THIS DRAWING.
WHERE NO DIRECTION FROM THE
CUSTOMER IS IDENTIFIED
SAMTEC'S PROCESS
REQUIREMENTS WILL BE USED.
DATE:
COMPANY:
CUSTOMER SIGNATURE:
PRINTED NAME:
PHONE No:
EXCEPTIONS:
OTHER
ASSEMBLY
PACKAGING
PROCESS
TOOLING
COMPONENT
NON STANDARD
X
DO NOT
SCALE FROM
THIS PRINT
.134
±.003
3.41
±0.08
.104
REF
2.64
.012 0.31
(SEE NOTE 9)
.309
±.020
7.85
±0.51
.139 3.54
"A"
"A"
ITEM NO.
PART NUMBER
QUANTITY
MATERIAL
1
ASP-103597-01-B
1.0000
UL 94 V0, COLOR: BLACK
2
C-140-03-H
114.00
PHOS BRONZE, 521 HARD TEMPER
3
SDB-030-6337
114.00
63% TIN /37% LEAD
4
K-850-650
1.0000
POLYIMIDE FILM
5
CT-ASP1132MS
1.0000
CONDUCTIVE POLYMER
.145 3.68
REF
.095 2.41
REF
.970
REF
24.64
1.070
REF
27.18
.320 8.13
REF
.354 8.99.035
REF
0.89
.900
±.002
22.86
±0.05
((19 POS - 1) X .0500[1.270])
.250 6.35
.017
±.010
0.43
±0.25
F
E
D
C
B
A
19
01
SECTION "A"-"A"
1
2
3
4
1.732 44.00
REF
.630 16.00
REF
5
PACKAGING VIEW
SCALE 1.5:2
ANY REV MADE TO THIS PRINT MUST HAVE AN UPDATED MKT PRINT
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 2
.XXX:
.005
.XXXX:
.0020
VITA 42 (LEADED) SOCKET ASSEMBLY
BY:
ASP-103612-01
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRYANT
10/22/2002
2
1
SHEET SCALE: 3:1
C:\EnterpriseVault\DWG\MISC\MKTG\ASP-103612-01-MKT.SLDDRW
PLATING:
CONTACT AREA: .000030 GOLD OVER .000050 NICKEL
REMAINDER: .000003 FLASH GOLD OVER .000050 NICKEL
NOTES:
1. USE ASP-103597-01-B BODY FOR NON-STANDARD 19 POSITION.
2. REPRESENTS A CRITICAL DIMENSION.
3. BURR ALLOWANCE: .0005[0.013] MAX.
4. MINIMUM PUSHOUT FORCE: .5 LB.
5. MAXIMUM ALLOWABLE BOW: .002[0.05] INCH/INCH AFTER ASSEMBLY.
6.
CONTACT TO BE FLUSH +/-.002
.
7. ONE REEL MINIMUM PLATING REQUIREMENT (85,000 CONTACTS PER REEL).
8. ALL DIMS TO BE SYMMETRICAL ABOUT THE CENTERLINE WITHIN ±.001[0.03].
9. .0025[0.064] MAX VARIATION BETWEEN SOLDERBALLS.
10. REFER TO VISUAL INSPECTION BOARD FOR SOLDERBALL APPEARANCE CHECKS.
11. THE DISTANCE FROM THE CENTER OF ANY SOLDERBALL TO THE
CENTER OF ANY ADJACENT INNER PEG SHALL BE .025±.005[0.64±0.13].
12. PARTS TO BE PACKAGED IN TAPE & REEL. FOR QTY'S LESS THAN 125 PCS, NO
TRAILER OR LEADER WILL BE SUPPLIED.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
REVISION M
.2500 6.350
.9000 22.860
"A"
RECOMMENDED BOARD LAYOUT
A
B
C
D
E
F
19 01
.0100 0.254
TRACE
.0200 0.508
PAD
.0100 0.254
VIA (PLATED)
.0250 0.64
PAD
.0310 0.787
FREE OF SOLDER MASK
.0250 0.635
DETAIL "A"
SCALE 12 : 1
.900 22.86
.050 1.27
(TYP)
.250 6.35
.050 1.27
(TYP)
.0250 0.635
(TYP)
RECOMMENDED STENCIL LAYOUT
STENCIL TO BE .0060[.152] THICK
19
01
A
B
C
D
E
F
NOTE:
OUTER ROWS MAY NOT NEED VIAS - THIS IS LEFT TO
THE DISCRETION OF THE BOARD DESIGNER.
SHEET OF
VITA 42 (LEADED) SOCKET ASSEMBLY
BY:
ASP-103612-01
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
BRYANT
10/22/2002
2
2
SHEET SCALE: 3:1
C:\EnterpriseVault\DWG\MISC\MKTG\ASP-103612-01-MKT.SLDDRW
REVISION M
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
